A wall bars made in Poland conforming to European safety standards PN-EN 12346:2001, PN-EN 913:2019-03 for gymnastic equipment.
BenchK 521 + DB1 is a wall bars with a permanently mounted pull up bar and dip bar with back support.
It has been made by combining solid beech wood with metal, creating a piece of sports furniture perfectly fitting into every interior.
The rungs have been made from the highest quality beech wood and hand oiled. The sides are made of single metal profiles (40×50 mm, 20mm thick), powder coated white matte.
The wall bars can be mounted either to wall or between floor and ceiling. The bottoms of the profiles have been covered by masking frames, which guarantees safety and adds to the aesthetics of the wall bars.
The advantage of BenchK 521W is an additional rung at the top between the pull up bar consoles, which allows for additional exercises.
DB1 dip bar has elbow pads and back rest made of integral polyurethane foam. This guarantees their durability, ease of cleaning and modern look. Each additional element can be adjusted to the user’s height or completely removed, if needed.
Assembly set included (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). Mounting to the wall is not possible to a partition wall thinner than 12 cm and to a plasterboard wall. Floor to ceiling mounting is not possible in the case of suspended ceiling. The decision and responsibility for the method of installing the wall bars rests with the customer.
Design reserved by the right of registration of the Community design No. 008135586-0015.
Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.